John22
Member
Hello All, As long as I was figuring out how to post pictures I thought I'd show some solutions to some issues I had with the cabinets I built last year before my trip. I really don't know what a stock interior looks like but I wanted to be able to grab a cool beverage from outside my camper or from within while putting lunch together without it being too much in the way. What I have is basically a 1/4 piece of ply between the cabinet bottom and an aluminum angle on top. This little area also holds my coleman propane stove. Initally I thought it would be study enough without a little stick/ prop when fully open but when filled with ahh..., beverages it sagged a bit. So I have a custom prop to help hold it up. The stove is held above the sliding shelf with brackets to allow the unit to slide with less resistance and both are held with bungee cords to keep it from flopping into the space where the ice chest was. The portapotty usually occupies the space below the ice chest shelf. You might also see the Fastgun type cam hold down on the floor, very fast and highly recommended. This little sliding shelf has been awesome! I can easily stop at the store throw in some ice or whatever without climbing in.
