murphy744
Advanced Member
i'm probably going to be ordering an Ocelot shell here in the near future. I chose the shell, well...because of my budget.I have poured through all of the shell builds and really have seen some great stuff. I have a tentative list of options I'm looking at. Any input would be appriciated....
OPTIONS:
Jacks
Aux Batt
Solar Wiring (I have a 100w portable)
Fan
Struts
Yaks (60")
Rear Wall Steps
Bed Ext.
Water Tank Fill for future build
Sink drain for future build
Propane cabinet
I'm still not sure if I want to bite the bullet on a furnace, or just go with a Wave 6? The furnace options takes a big junk of build funds.
I may even delete the Fan, Yaks, and rear steps option???
I spoke with Marty @ ATC and he did recommend the IOTA 30amp converter with the IQ4 smart chip, if I want 110v capability. This would be in the future as well. I could put in a 110v plug, but he said just run an extention cord out the port.
And finally, struggling over a side dinette build.
Decisions, decisions......
OPTIONS:
Jacks
Aux Batt
Solar Wiring (I have a 100w portable)
Fan
Struts
Yaks (60")
Rear Wall Steps
Bed Ext.
Water Tank Fill for future build
Sink drain for future build
Propane cabinet
I'm still not sure if I want to bite the bullet on a furnace, or just go with a Wave 6? The furnace options takes a big junk of build funds.
I may even delete the Fan, Yaks, and rear steps option???
I spoke with Marty @ ATC and he did recommend the IOTA 30amp converter with the IQ4 smart chip, if I want 110v capability. This would be in the future as well. I could put in a 110v plug, but he said just run an extention cord out the port.
And finally, struggling over a side dinette build.
Decisions, decisions......