Quick wiring question...

dustinbriq

Member
Joined
Apr 4, 2006
Messages
27
I was off-loading my Hawk today when pulling the truck away from the camper, I forgot to unplug the plug from the camper to the bed of my truck. The 2 wires pulled out of the male connector plug. My question is what wire goes where? There are 3 numbered holes. 1 and 2 appear to have had the wires in them as the screws are loose at these holes. Does the white go in 1 or 2? Thanks in advance.
 
we have directions on our web site

service manual page

Marinco plug (scroll to the bottom of the .pdf)


http://www.fourwheelcampers.com/MARINCOCAMPERPLUG.pdf


#1 slot = black wire (ground)


# 2 slot = white wire (positive)



hope this helps

stan the man


================================================================


I was off-loading my Hawk today when pulling the truck away from the camper, I forgot to unplug the plug from the camper to the bed of my truck. The 2 wires pulled out of the male connector plug. My question is what wire goes where? There are 3 numbered holes. 1 and 2 appear to have had the wires in them as the screws are loose at these holes. Does the white go in 1 or 2? Thanks in advance.







.
 

New posts - WTW

Back
Top Bottom