After over 9 years of raising and lowering the top of our camper, one of the wires has suffered a break and I do not have solar current running to the charge controller. Thus far, the only thing I've done is determine that is the culprit.
Before I tackle this repair work - good news is I get to lay down on the job - I want to solicit everyone's thoughts on how to best handle the constant flexing/bending of these wires at the lift panel hinge.
I've helped others with this repair but it is good to check out the collective wisdom of this group for the best solution.
Before I tackle this repair work - good news is I get to lay down on the job - I want to solicit everyone's thoughts on how to best handle the constant flexing/bending of these wires at the lift panel hinge.
I've helped others with this repair but it is good to check out the collective wisdom of this group for the best solution.