Well after way too many Sundays I finally pulled the trigger.
During this last Expo East I decided on a Bundutec Sable which will be customized.
Have not tightened down all the screws but basically no water tank but a sink with a small gray tank that will be gravity fed.
Forced air heater, AGM battery, converter. (I have my 50Ah Renogy Lifepo4 box as a backup)
Using my Truckfridge that Squatch had told me about when they had gone on sale.
Lagun table and maybe an interior stove but hook ups so I can use my portable in either case.
At this time I am considering having 170watt Renogy panel with controller drop shipped for Rory to install. They carry Zamp but I am familiar with Renogy so unless someone can give me a reason that Zamp would be a better choice I'll go with what I know
Also getting the insulated panels for the top and a green ripstock for the popup. Camper will be gray.
There is a video for a custom Sable that will be similar. My fridge will go up front and the back unit will be all storage. Getting a 2" extension on the top so I have a teeny bit more headroom in the bed. Bed is pretty thick memory foam with storage underneath and on the sides.
Max fan in back vent over the bed. Also getting an AC. I know I may not use it much but I don't sleep well in muggy.....lol
Some of those glow steps which felt pretty sturdy at the Expo.
An exterior table which also stores Maxtrax and drops down for camping use.
Roof Rack, ladder to reach it and a small box on the back for storage.
Torklift frame mounts.
Jenn and Rory have been great to work with and I think this will be a good mix of quality, customization and price.
6 months give or take a few weeks.
Link to the video and a couple pics of that custom maxtrax table they make
During this last Expo East I decided on a Bundutec Sable which will be customized.
Have not tightened down all the screws but basically no water tank but a sink with a small gray tank that will be gravity fed.
Forced air heater, AGM battery, converter. (I have my 50Ah Renogy Lifepo4 box as a backup)
Using my Truckfridge that Squatch had told me about when they had gone on sale.
Lagun table and maybe an interior stove but hook ups so I can use my portable in either case.
At this time I am considering having 170watt Renogy panel with controller drop shipped for Rory to install. They carry Zamp but I am familiar with Renogy so unless someone can give me a reason that Zamp would be a better choice I'll go with what I know
Also getting the insulated panels for the top and a green ripstock for the popup. Camper will be gray.
There is a video for a custom Sable that will be similar. My fridge will go up front and the back unit will be all storage. Getting a 2" extension on the top so I have a teeny bit more headroom in the bed. Bed is pretty thick memory foam with storage underneath and on the sides.
Max fan in back vent over the bed. Also getting an AC. I know I may not use it much but I don't sleep well in muggy.....lol
Some of those glow steps which felt pretty sturdy at the Expo.
An exterior table which also stores Maxtrax and drops down for camping use.
Roof Rack, ladder to reach it and a small box on the back for storage.
Torklift frame mounts.
Jenn and Rory have been great to work with and I think this will be a good mix of quality, customization and price.
6 months give or take a few weeks.
Link to the video and a couple pics of that custom maxtrax table they make