Barko1
Senior Member
I managed to install some bags on my 150 but am now going to put them on the F250 and ran into an stumbling black. To install the upper brackets it says to remove the rubber axle bumps which I have done but there is a remaining bracket that is held to the frame by 2 what seem to be large rivets. Nothing I can get a wrench on. It seems this bracket has to go and I'm stuck. My airbags are enroute, I am just getting ready and seeing if the would be any problems.
And that stupid rubber block was held on with a 15mm bolt?? And the shock low bolt was a 22mm? At least that is what fit best. Wanted to see if I could get all those loose before my shocks arrive. Any tips to make shock install easy?
And that stupid rubber block was held on with a 15mm bolt?? And the shock low bolt was a 22mm? At least that is what fit best. Wanted to see if I could get all those loose before my shocks arrive. Any tips to make shock install easy?