Search results

Going to a modern rack system, willing to ship. Located: Everett WA Seller: Hunter

I would buy a set!

Only if there is going to be a load of snow overnight.

Not in the propane box, in the area surrounding the fridge vents yes.

Yes, I took the photo right before I stuck it back together.

The hole was caused during the removal of the water tank, it has a bulkhead flange that goes there to isolate the box from the interior of the cabinet.

2008 Eagle, 2nd Owner, the gap is where the water tank was at, the tank has been empty and dry since last June.

So even though I sleep with the roof vents and windows open condensation has formed on the plastic box where the propane is stored. This has caused quite the musty smell, some fungal growth and completely soaked the bottom of the cabinetry. Any suggestions on how to tackle this i'm at a loss for...

I removed my porch light as it no longer worked.... I also replaced the ridiculously large halogen flood lights with quad LED spot/flood lights. The LEDs are great for backing up or recoveries at night.

I lived out of my Eagle off the truck for about a month down in San Diego. I recently took it off for a week to do some maintenance to the truck and lived out of it then. I didn't have any issues, but would I do it again? Heck no it was like crawling in and out of a hermit house.

I removed the spacers on my eagle, makes a hell of lot easier getting in to camper. I also removed the front accessory track bar so the camper sits flush with front of the bed. Does it help with weight distribution? eh... the jury is still out on that issue. But after being rear ended i'm glad...

2015 Tacoma, Access Cab, 4x4, 4cyl, 5spd manual with 2008 Eagle loaded last 9,000 miles I averaged 20.3 mpg.

Did you check if there is any power to the lights?

Can't really help you as I had fluorescent lights before I converted to LED strips which are much brighter.

Its just the caulk pushing up. When I replaced my exterior screws with Stainless I used 3M 4000UV to fill in the low spots.

I run a small 150watt that plugs into the cigarette lighter. I use it mainly for charging electronics and running my razor.

Running OME HD Dakars + Fox 2.0 Shocks + Fox 700lb Coilovers+ E rated Tires, I also removed the front rubber bumpers to move the weight as far forward as possible. The Eagle is on fulltime and the truck sits level.

Running Stage 4 EBC Slotted/Dimpled rotors with the greenstuff pads, so far much better than stock especially in the torrential PNW rain.

@Pax2525 By bars do you mean the tie down bars that attach to the bed bolts? If so I'm interested.

Pelfreybilt Offroad makes a mount designed for a swing-out bumper that I use. The mount is welded to the center of the bumper where the ball hitch would go.

Pelfreybilt Offroad makes a mount designed for a swing-out bumper that I use. The mount is welded to the center of the bumper where the ball hitch would go.

I have EBC's stage 4 slotted/dimpled rotors and the green stuff pads. Haven't had them for very long so I can't speak to their performance just yet.

@Ramblinman I had the same problem on my 08' I wound up replacing all exterior screws with high-end stainless. Just right at 300 screws.

Wow, impressive. Just found a leak in my lines yesterday after wondering why a tank only lasted 2 weeks. Luckily I didn't blow myself up!