Search results

I have had the great opportunity to work with Bryan and to have him and his crew repair the damage caused by a severe hail storm. It is a journey from Colorado to Washington, but the effort, cost in getting this done was worth it. The camper looks excellent. The wife and I made a enjoyable trip...

We use a small 12volt ceramic heater while traveling. Draws very little voltage. Sealing and insulation the camper is key. I also have the heater on a small switch just inside the door. It is controlled by 2 snap switches. On at about 35 deg f and off at about 50 deg f. Heater is placed in a...

We had our 10ft CO on a 1995 Dodge 2500. Put Firestone air bag set up on rear. Brakes on this truck left a lot to be desired. Upgrades by EGR brakes front and rear and a exhaust brake helped a lot. Put over a hundred thousand mile on this truck with a Alaskan and prior S&S camper with a lot of...

When traveling I always put bolt in on the left side. We have traveled with it out and noticed a large # of dead little road bugs on the insidealong the outside edges of the three CO panels

Nice xxl long sleeve and xxl long sleeve. 2 of each. If you do this quality is #1 Thanks Mike

We had the same issue with our 10'CO We just use two small blankets to cover the top panel from the side panels on each side. Keeps panels protected. Just fold. Ack and set out double sleeping bag on top of blankets.

Thanks for info

Any one changed over to the Nova Kool refrigerator. I have a 10ft CO with a 3 way dometic refrigerator. It is leaking ammonia and we are sick of dealing with it. We camp at elevations above 10000ft so propane never worked well. Looking at Nova Kool 4500 12 Voltage DC. Will supply power via 2 12...

Very nice decals. Thanks

Nice Decals. How do I get two of these decals. Thanks Mike C

Rusty my brain is challenged daily and age makes the challenge interesting to say the least. See my above post for a rough drawing of the support Spike

I was able to upload a rough drawing in the JPG below. Black lines are of brace. The drawing is of just the drivers side. Passenger side is the same. I had to draw with paint so it is not the best. Spike

Hello, I will post pictures when I mount the camper back on my truck. Just can not get pictures where it is stored. Sorry you are working your brain overtime. Yes pictures would be great. As for the valves they are Parker 1/4" F400B. plumbed to each cylinder line controls flow up to 8gpm and...

I would take pictures but the camper is off the truck right now and tucked in the corner of my shop. The rear structure is as follows. I will explain the best I can Along the bottom of the camper i have a piece of 1 1/2" x 2 x 3/32" thick square tubing that runs under the bottom of the camper...

Thank You Love our camper and enjoy it to the fullest. Always gets comments. Keep builidng

Hello, We have a 2005 10’ front dinette we purchased from a couple in Fort Collins Co. Camper is on a 1995 Dodge 2500 with many modification for power and our 4 wheel drive needs. We have had a Halmark and have had a S&S , Lance, and several types of trailers. The reason for our choice of the...

Verynice, I posted a picture in the Alaskan picture gallery. Good Luck Spike 38

Verynice, Not a uncommon problem. Air seems to have enough pressure to lift the top of the camper. Getting passed by a 18 wheeler is a good cause. On my camper a 10' overhead it has a 4" x 3/8" bolt that goes thru to tie down the top half to the bottom half. This bolt goes thru at the left...

Bryan, Welcome good to see you on the site. By the way we love our 2005 10'cabover. Mike How tall is your gun vault?

Good Fun Winter Camping

Hello, Love the Wanderthewest site. We have been life long campers and have run with a variety of camping vehicles. We started off with a CJ3B Jeep modifiyied heavily with a tent, gear, dog and fish stuff in the back, we went any where we wanted. I to this day don't know how we did that but we...