Living The Dream
Senior Member
Hey Jame,
For the cab over area, I think it was more of the same material. Post 37 in this thread has a pretty clear photo of it that might help you figure it out a bit better. I guess the only difference in the cab over area is that the square tube is open on one side. I add a piece of wood up there so I would have something to mount my lifters to as well.
The roof seemed to be made out of the same square tube. I think the roof is a bit larger than the base (maybe 1/2" overhand all the way around) but i am not really sure. Its been a while. Check out pokybros thread, he spent some time on the roof fixing.
For the bed slide that is a pretty standard feature in most four wheel campers. We dont have any sheets or anything, just bare foam mattresses we put sleeping bags on. Check some recent four wheel camper tour videos on youtube and you'll see a traditional pull out bed situation.
Keep the questions coming. Good luck with your welding, that sounds like a big project from here.
For the cab over area, I think it was more of the same material. Post 37 in this thread has a pretty clear photo of it that might help you figure it out a bit better. I guess the only difference in the cab over area is that the square tube is open on one side. I add a piece of wood up there so I would have something to mount my lifters to as well.
The roof seemed to be made out of the same square tube. I think the roof is a bit larger than the base (maybe 1/2" overhand all the way around) but i am not really sure. Its been a while. Check out pokybros thread, he spent some time on the roof fixing.
For the bed slide that is a pretty standard feature in most four wheel campers. We dont have any sheets or anything, just bare foam mattresses we put sleeping bags on. Check some recent four wheel camper tour videos on youtube and you'll see a traditional pull out bed situation.
Keep the questions coming. Good luck with your welding, that sounds like a big project from here.