100acrehuphalump
Senior Member
Today I picked up my aluminum mount for the awning from the welder. Cost $30 So I brought it home and attached the awning to it. I was concerned about the bolts on the backside tearing into the siding of the camper, so I used some flex water tube and drilled a couple of holes on each 5" piece to cover the bolt ends and act as a bumper against the camper. The awning fits nicely against the camper and I've attached the screen room too. I used some eye bolts on the corner brackets on the other side to run some lines of 550 para cord for drying laundry or attaching the thermal cloaking device and camo netting so I can hide from any imperial storm troopers flying overhead..