FWC Pressure Water System

[pictor1]

thanks for the input, it is greatly appreciated. I will try and look at it in the next day or so. I am pretty sure the valves are in the right position. FWC sent me a pdf which looks pretty good for trouble shooting, so between your suggestions and the pdf I have a number of things to look at.


View attachment Water Pumping Priming copy.pdf

 

[Yubaman]

So I bought a Seaflo quick-connect hose and sprayer and a bunch of Sharkbite connectors and this is how I routed the pex to the fresh water fill box.

 

[pictor1]

thanks for the input, it is greatly appreciated. I will try and look at it in the next day or so. I am pretty sure the valves are in the right position. FWC sent me a pdf which looks pretty good for trouble shooting, so between your suggestions and the pdf I have a number of things to look at.

Water Pumping Priming copy.pdf

well I have water again, after going thru all the steps in the pdf that FWC sent me I finally turned the water pump adjustment screw (not the one with the wires going into it!!) in 5 full turns and the pump started doing its job again, then returned it to its original position. Happy me;-)

 

[pvstoy]

Well look at that... two happy post in a row.

Nice addition to water volume and pressure to the outside. Remember that you can burn through a lot of water if you are needing to save.

Forgot about the bleed screw, you must have had a vapor lock and not wanting to prime. Great to have water again.

Thanks both of you for coming back and sharing your results!!!