I’d like to install a Camco Wave 3 catalytic heater for seasonal use meaning I want to remove it 8 months of the year. I called Camco and they do not make a quick disconnect fitting with a shut off valve that I would put onto a T in an existing gas line. Has anybody done this?
My plan was to screw/3mtape my 39”X 39.5” solar panel directly to the roof, there are 45 screws in the roof and the solar panel will cover a bunch of them, plus the center seam will be partially covered by the panel. Are the screws and center seam prone to leak? Or need periodic resealing? I’d rather not put the panel on a rack. Are there Z brackets where you can easily unbolt the panel from the brackets leaving the Z brackets screwed in? Ideas?
Thanks guys for your help. Six5
My plan was to screw/3mtape my 39”X 39.5” solar panel directly to the roof, there are 45 screws in the roof and the solar panel will cover a bunch of them, plus the center seam will be partially covered by the panel. Are the screws and center seam prone to leak? Or need periodic resealing? I’d rather not put the panel on a rack. Are there Z brackets where you can easily unbolt the panel from the brackets leaving the Z brackets screwed in? Ideas?
Thanks guys for your help. Six5