Manfred65
Senior Member
...and replaced the sidewall today:
The wall is bonded with "Teroson Terostat MS-939" ( a polyurethan-glue which reacts with the humidity ) and then screwed to the frame. Later i will add Aluminium L-Profiles 60 x 60 x 4 mm. Before this we have to replace the floor. Without the Aluminium there is enough flexibility in the construction to push the floor between the sidewalls.
Sometimes it would be nice having a kitchen without floor like this, easy to clean: (view from the rear through the floor)
When the screws were removed the floor fell out and i realized that it is necessary to support the complete kitchen construction in order to prevent the left side of the camper to collapse.
see you tomorrow
The wall is bonded with "Teroson Terostat MS-939" ( a polyurethan-glue which reacts with the humidity ) and then screwed to the frame. Later i will add Aluminium L-Profiles 60 x 60 x 4 mm. Before this we have to replace the floor. Without the Aluminium there is enough flexibility in the construction to push the floor between the sidewalls.
Sometimes it would be nice having a kitchen without floor like this, easy to clean: (view from the rear through the floor)
When the screws were removed the floor fell out and i realized that it is necessary to support the complete kitchen construction in order to prevent the left side of the camper to collapse.
see you tomorrow