Propane three way split for stove

[jasper]

Hey all,

I have a 2018 Fleet Shell with a furnace, but no stove.

I'd like to extend the existing propane plumbing to add the stove to the system.

I took a look in the cabinet, and found this fitting, which appears to be a 3 way split. It seems like I could just add an additional line to a cutoff valve for my stove.

Can y'all confirm? Or should I find a different 3 way split to replace what's in the photo with?

For reference, the line coming from the bottom comes from the propane locker, and the line leading to the right goes to the furnace. Stove would be routed from that top port that seems to be capped currently.

Lastly, if anyone is familiar with this fitting, do you know what the thread size is?

Thanks!

 

[Lighthawk]

Yes, there's often a cross fitting which offers another tap. I think it's all 1/4" flare fittings.

 

[jasper]

Cool, thank you. Realized the photo I tried to attach wasn't there before! Oops.

It's all threaded and rubber hose, not flared connections it looks like.

 

[Vic Harder]

Not flares, at least I would never put dope on a flare. Probably 1/4" NPT. Turn off your propane source and remove that plug and take it with you to the store. The folks there should be able to supply you with the right fitting/hose.

 

[jasper]

Perfect, that's what I figured. Thanks!