Thanks for the thumbs up, Vic!
I do not have solar. I am considering a new camper in the next few years, so I didn't go all in on the latest plan. I have left enough room in the cabinet for a solar charger, or could I swap out the current DC-DC charger for a MPPT (although I think I read in one of your or Rando's posts that the Renogy MPPT does work that well?). I also left room for a passthrough next to the 4AWG wires coming into the side of the camper to connect to a portable panel if I get that far--I am trying to balance using the camper and spending money/working on the camper
There is no factory kill switch before the fuse box. I could easily add one, either inside the new cabinet or near the fuse box. If I am thinking correctly, the BlueSea breakers enable me to cut the connection to the truck, and the kill switch would enable me to easily shut the camper circuit off when I wanted to work on it, storage, etc.?
I currently have a "dummy" monitor near the sink that displays water tank and battery conditions--red, yellow, green--that must be original equipment. Any suggestions on a monitor that is close to plug and play?
Thanks again!
Blake