Road case cabinet

[August]

I am planning to build some cabinets using the Road Case hardware and plywood. I've seen posts of some people doing this but I cannot find them. Anyone seen these?
I am going to build a cabinet where the milk crates are and bring the cabinet below the pass through window up to level of carpet ledge.



Thanks

 

[craig333]

Interesting idea. I've been meaning to build (or have built) a cabinet right in that same spot.

 

[billharr]

I put a cabinet in both passenger side corners.

Front corner

Rear corner

Moved the FWC cabinet forward to make room for the rear cabinet. Build site here.

 

[August]

What thickness plywood did you use?

 

[August]

Here's my start. Increased the height to match the carpet ledge. Added a good bit of storage. The other small compartment with the inverter I left open so our skis can fit.

Now I'd like to build some cabinets like the member in the previous post.

Do you think 1/4 ply is too light?

 

[August]

I put a cabinet in both passenger side corners.

Front corner

Rear corner

Moved the FWC cabinet forward to make room for the rear cabinet. Build site here.

What flush mount pull latches are those?

 

[billharr]

What flush mount pull latches are those?

Slam latches that FWC is now using. I ordered from FWC, call Brenda if you need parts. They are great positive latch, used on doors and on the drawers in my build.

What thickness plywood did you use?

I used 1/2" birch, not a wood worker but 1/4 seams light to me.

 

[August]

Here's a pic of some flight case cabinets.