Otis
Advanced Member
I have the 100 watt panel and Zamp 15amp controller as installed by FWC (a retrofit) with the factory installed group 24 75ah battery (the battery is about two and a half years old and was not treated kindly the first couple of years of ownership: depleted several times far below 50% of charge).
Currently (no pun intended) the contoller reads: 13.6v/full; 0.0amps; 25.7ah
I am understanding these indicators to be telling me that my battery is full, therefore it is not "taking" any more charge. My main question: is the "25.7ah" indication telling me that my battery has only 1/3 of its original charging/storage capacity? (Completely possible given the poor care the battery recieved!)
Thanks for any insights folks can provide - Otis
Currently (no pun intended) the contoller reads: 13.6v/full; 0.0amps; 25.7ah
I am understanding these indicators to be telling me that my battery is full, therefore it is not "taking" any more charge. My main question: is the "25.7ah" indication telling me that my battery has only 1/3 of its original charging/storage capacity? (Completely possible given the poor care the battery recieved!)
Thanks for any insights folks can provide - Otis