Jeff Wanamog
Advanced Member
On a FWC, the wires that come from the roof for a solar panel terminate in the cabinet or in my case just to the right of the cabinet.
My question is, after the power comes from the charge controller, at what point in the campers electrical system do you introduce the power?
If you tie into an existing unused circuit, the campers cut off switch would stop the charging from the panel when in off position.
The best solution would be to tie directly to the batteries, but they are on the opposite side of the camper.
Thanks.
Jeff
My question is, after the power comes from the charge controller, at what point in the campers electrical system do you introduce the power?
If you tie into an existing unused circuit, the campers cut off switch would stop the charging from the panel when in off position.
The best solution would be to tie directly to the batteries, but they are on the opposite side of the camper.
Thanks.
Jeff