SmashRocks
Advanced Member
Hey everyone, I apologize if this specific issue has been discussed but I’m stumped....plus it’s now raining so I’m stuck in my man cave having a beer and meddling over my issue.
I purchased a 160w renology panel and a 30amp Epever solar controller with the digital remote screen. Everything is mounted and wired and I’ve checked continuity for wires but my MC4 to SAE adapter simply won’t work. I used a piece of Romex to temp up the wiring from the panel to the port on the roof to make sure the panel or controller wasn’t broken but it’s not. The adapter also has continuity on its own so in theory it should work, it’s just carrying current..
Is there another way to splice in the panel to the pre wired port other than using an adapter? I don’t want to buy another but I suppose I could to test it.
Off to Home Depot now to buy angle aluminum to build a bracket for the roof. Any suggestions are appreciated. Cheers.
I purchased a 160w renology panel and a 30amp Epever solar controller with the digital remote screen. Everything is mounted and wired and I’ve checked continuity for wires but my MC4 to SAE adapter simply won’t work. I used a piece of Romex to temp up the wiring from the panel to the port on the roof to make sure the panel or controller wasn’t broken but it’s not. The adapter also has continuity on its own so in theory it should work, it’s just carrying current..
Is there another way to splice in the panel to the pre wired port other than using an adapter? I don’t want to buy another but I suppose I could to test it.
Off to Home Depot now to buy angle aluminum to build a bracket for the roof. Any suggestions are appreciated. Cheers.