Tricks for attaching gear, etc. to the outside of an ATC?

[h2opup]

I see lots of nifty ideas on this site about people strapping shovels, etc., onto the outside walls of their pop-up campers, but I am wondering what is the best way to do this?

When I collected my Ocelot from Marty recently, I asked him about this. He looked a bit horrified and said the framing is "very small", and that adding weight in this way was not a good idea(??). I did have extra support put into the left side back wall during the build to possibly add a Rotopax in the future. Marty pointed that out and said that was the only place in the rig with solid support for added gear.

What is the trick for adding other gear?

Thanks.

 

[Casa Escarlata Robles Too]

This is how I carry my small camp shovel.Just hangs from the door stopper.
It's out of the way and easy to get hold of.
Frank

 

[h2opup]

Clever!

 

[Wandering Sagebrush]

Roof rack is one way, check out ski3pin’s camper photos. Another possibility is to make something that hangs off a rear jack mount.

 

[h2opup]

I'm trying to minimize what I put on the roof for weight. I'm not sure I know what you mean about hanging something off of a rear jack mount?

 

[Wandering Sagebrush]

I believe FWC offers an accessory that bolts to the jack mount, and has some way of securing gear/tools to the camper. It shouldn't be too difficult to make one. I’d find a link, but my browser won’t open their website. Appears to not be secure.
Try this… Aluminess Axe Shovel Expedition Kit – Mule Expedition Outfitters

 

[DesertDog]

I'm toying with idea to mount shovel and axe underneath the part that overhangs the truck cab. There are a couple inches between roof of a Tacoma and bottom of a Fleet to allow a shovel and axe to fit. There appears to be a sturdy piece of plywood supporting the sleep platform. Idea is to use the wood threaded inserts into the plywood and then use fist clamps to hold the items. Anyone else mount to bottom of the overhang like this?

Also Before I start drilling. does anyone know how thick the plywood is this region?