It’s official, I’m on the list for a full size ATC Shell. It’s going to be Spartan on the inside, except for a furnace/stove, and a passenger side storage bench for batteries and some gear.
ATC will do the install.goinoregon said:good to hear. are you going to install furnace, etc. yourself ?
The layout is floating around in Marty’s and my mind. I want the furnace with stove on top to sit in the driver side back corner, but not sure about the propane locker. Right now, I’m thinking in the driver side front corner. I also want a tee fitting in the propane line so I can add possibly add a catalytic heater if needed.goinoregon said:thx WS. you would'nt happen to have a layout design?
i am thinking of doing something similar, but am having brain freeze on design.
Slightly over a year.SunMan said:If you don’t mind, what is the latest wait time you were given? Almost afraid to ask.
Absolutely, he was great to work with when we built theBobcat.Ronin said:Congrats on pulling the trigger! You'll love brainstorming with Marty!!
I am also thinking about that corner for the propane locker. If it’s going to be lower than the cabinet with the furnace and stove, have Marty build it with a small top opening storage space to bring the corners to the same height. I might run a removable counter between the them. The only other addition to the interior will be a long low top loading cabinet along the passenger side for batteries and gear. It will be at the same height as the ledge that extends over the bed. In essence making a bench for seating. My goal is to maximize floor space.Taku said:Nice - we have a Cougar on order that will be mostly a shell and I plan on finishing the build. Have been trying to decide where to put the propane locker. It is mid-ships on our Ocelot and I built the shelving around it, but am thinking the front drivers corner would keep it out of the way more. will spend time this winter figuring out the other bits and pieces.
That's where I put my propane cabinet on my Puma build. It has worked out well having it up front.Taku said:Nice - we have a Cougar on order that will be mostly a shell and I plan on finishing the build. Have been trying to decide where to put the propane locker. It is mid-ships on our Ocelot and I built the shelving around it, but am thinking the front drivers corner would keep it out of the way more. will spend time this winter figuring out the other bits and pieces.