Search results

not Fair..........lqhikers do you have a welder I want one.....I like the block you made for the roof hand support.........hey you think this system could be built into the camper.....Ben , Stan what do you think.....

Tomas black butte has good fishing if your in to that....it has been a while since I camped there... you can google earth the area there is Stoney gorge that has lake camping......there is the towns of Williams and Maxwell......fuel and food there is a nice rest area just before Maxwell.....Near...

BUZZ thank you.....I did catch what ben said. if the crutch slipped opps......I will make a set of stops to protect the roof.... one thing I did noticed the hand support looked like it bowed a little where the crutch tip was placed. Did you see that as well......I also tested the lift potential...

I want to thank BUZZ for giving me the inspiration for thinking about and creating the roof lift and lowering device. I used many items that I already had and the cost of the items I needed was about $15.00 and OSH. Items needed. 1. 1 pair of aluminum crutches 2. 4 hose clamps 3. ¾ inch PVC pipe...

Jack I can not tell if your generator has a charger port my honda has a plug for a 10 amp charge...... if yours has one you could use it to charge the battery faster.....great job on you camper.

JAW I did a simple test with my Norcold 323 refer on propane....I was using a remote thermometer I got a reading of 19.9degrees f. thats cold.......

Ben again your knowlege is always welcome. I made this chart because I am a lay person and all the information that I got was above my head...... I hope this is something that anyone can use to give a ball park figure of AMPS used......IMO.

OK thanks DD. the values in red you can change. the equipment values if you give to me I can change. or you can do the calulations your self.....

I've been camping with a tent for 40 years since I was a kid. I will keep my tent for some trips that call for it. I have no regrets my set up and take down will go from 3 + hours to 30 mins.......more fishing time...............

AK I checked the back of the fuse panel the "bus" is there. it looks like FWC added another one for the neg - side.........good luck let me know if you need anything i'll post photos...

Buzzman, yes the gray thing is the refer. your 07 has more storage and the counters are higher. my wife is 5'2" so our counter height is just right. AK Nomad, thanks the converter was behind the propane leak detector panel. here is a photo of the access panel with out my hand showing the...

Since I could not find anyone installing a 12 volt socket I figured it out. on my 04 Granby I have an access panel to the battery isolator I discovered the empty fuse slots are pre wired. I was worried about directly hooking up the extra 12 volt socket to the battey. (What would happen if I...

Propane test. at 0800 I fired up the refer. temp was 52 degrees at 0930 temp was 30.2 degrees outside temp 59 degrees. 1130 update 20.5 degrees camper temp 64. it seems propane is better than AC. Sam just to let you know I had low batteries and the unit gave no readings just "---"

You folks down south have great fishing I'm so envious. no fishing here due to oil spill

I wanted to find a way to hold speakers outside of camper this is what I came up with. I cut a lenght of PVC pipe 1 1/2" diam in to 2" pieces. using 1 1/2" webing I sewed one end to fit the PVC pipe I placed a quick clip on the other end. I put a clip on the webing and a D ring on the back of...

Holly Cow Man................I don't think my F250 could carry that thing...better to put wheels on that.....oh wait....that is called a travel trailer......

Buzz look at my photo in the gallery i'll try to post it Stan said it was discontinued here is a web site http://www.e-zstep.com two steps into hitch.

I found a neat way to check if your refrig is working. I use a remote thermometer made by Acu-rite I place the remote unit in the refrig to get the temp. I velcro the main unit to my dash. It gives me the temp in the truck and the temp in the refrig. my refrig gets to 38 degrees on AC I have not...

Has anyone added a 12volt socket to the exsiting one already in the camper. if so how or where did you hook it up. Directly to the battery? Tap into the original 12 volt socket in the camper? hook into the main 12 volt switch and battery isolator? should I add a fuse? if yes what size fuse.....thx

Thx....D.D. I'm still learning how to do this fourm thing........

Sorry about that........I thought it might be easier to put photos in the gallery. The awning supports were made from 3/4" dowel cut to 16" lenghts then I put a 40 degree angle on one end. then I velcroed each end to match the window flap done. the propane adapter was bought as a kit from...

I made some simple camper mods....I posted photos in the gallery. check it out..........

Thx Ben.... I was thinking out loud I wanted to look ahead just in case.After yesterdays rain I opened up the camper and it was all dry.......but I can't believe one gal. of rhino type liner would weigh so much?

I also would like to say Thank you to all the Vets.......bless you all

303 cleaner........ 303 aerospace protectant..... when I picked up my camper i used the cleaner first. waited awhile then I used the 303 A.P. I will hit the inside later.