Search results

I have the travel and (2) Thermarest RidgeRest foam pads and sleep on it every night. 165 pounds. Does not bottom out but does develop a bit of body shape depression memory. This can be dealt with by moving the snap together components around, which I have not bothered to do. Eventually will...

In contrast to the strong and reliable welded aluminum frame portion of the camper, FWC assembles the plywood portion by stapling and screwing into the end grain of said plywood without benefit of adhesive.

My propane tanks will smell when very low on gas and hooked up.

Wiggys makes a great bag . Mine is Mummy style but made wider and longer than usual. Very roomy for a mummy style. Slept outside for a year with lowest temp 9 degree F and no cold complaints. Bag warms up in 30 seconds once you get in it. Drys really quick when wet.

That would be 4 hoof drive (4HD)

I second the HH-66 for assembling new vinyl. I have used it to make a top for a Jeep and it lasted for years. The smaller can has an integral brush in the lid that is really handy and does not need to be cleaned after use as it is immersed in the glue. Plus it can be used to adhere your own...

I have used a hot air welder to fabricate several air supported structures (bubbles) for swimming pools. The biggest problem with these welders is that the vinyl needs to be heated to just shy of burning and not a degree higher or a degree lower. Lots of opportunities to breath in poly vinyl...

Try dabbing the adhesive with the strongest tape you have. Each dab will physically pull off a little of the offending adhesive. Will take a bunch of dabs.

Where are you located?

I think the elastic webbing Elasbelt by Intes is a high quality product. http://www.inteswebb.com/en/controllo-qualita/qualita-intes/

I think the elastic webbing Elasbelt by Intes is a high quality product. http://www.inteswebb.com/en/controllo-qualita/qualita-intes/

http://www.outdoorfabricscanada.com/Furniture-Webbing-2--Soft_p_2068.html

Had just finished a hike and was sitting in the Jeep getting de-organized. Was ready to get going and turned the ignition - nothing. Tried again and again nothing. Jeep wouldn’t start because it was already running! Is it just me or does anybody else miss the sound of a starter trying to engage...

On the west side of the Tetons in Teton Valley Idaho: Teton Valley Auto Repair 420 Lupin Lane Victor ID 83455 208-787-2874

Just read the thread from the beginning and see that you did a great job of sewing it. I was right! It would be a good idea to restitch it with a #69 or #92 bonded polyester with uv inhibitors. Probably not what you want to hear. But the regular home sewing thread is not up to the task. These...

I would divide the pucker into either two, three or four puckers and position them over a larger area. I would also move the puckers away from the corners. The pucker should be oriented so that it sheds air and water to the rear of the camper to achieve a shingle affect. The pucker in the...

Brian, I'm sorry to say that I took the cabinets to the dump earlier in the week. I would of much rather you put them to good use. Michael

Free to a good camper. Eagle interior cabinetry, table top, pedestal, base, water tank, plywood floor bracket for propane tank, water tank, (1) 4.5"x16.5"x16.5" cushion. Most of cabinets have been disassembled. Drawers in one piece. Main drivers side cabinet face intact with doors. Upper right...

Boatbuilder, Thought you were starting with a pre-made inexpensive and cheap blue or black/silver tarp and were going to fabricate from there. For a do it yourself, seamless, one piece, heavy duty, high quality, durable camper cover I would use 120" wide 17ounce vinyl coated polyester and...

Might want to pinch the length and width together at each corner and set a grommet through the triangular seam allowance. This will form a "shoe box" shape without any seams along the top of the tarp. For a finished tarp size of 8' x 12' with 28" of drop: Cut fabric to 156" x 204" Mark 30" in...

Nylon stretches much more than polyester. So use: Nylon for recovery. Polyester for tow.

Either Vinyl Coated Polyester scrim also known as VCP Or Vinyl Laminated Polyester scrim also known as VLP Either/Or probably also have a dirt shedding acrylic top coat. Probably made in Germany. VCP & VLP are both solid and imperneable by construction where as SilNylon "waterproofness" is...

Why switch from the XR 250L to TW 200?

I have a 2006 GMC Savanna and would like to replace the worn out stock manual seats. Any recommendations for replacement seats that are more comfortable than the stock ones? Would like an air suspension seat if possible and independently adjustable seat cushion and seat back.