Search results

Due to the Coronavirus the county of Sacramento now has a shelter in place law. Here is how it is affecting us at the moment. We have a skeleton crew in the shop right now. We are going to do our best to be here daily from 8 am to 5 pm. We have an appointment for 10 am Saturday with no way of...

This solar panel has a designated ground wire that is not connected to the frame. The battery separator is not part of the solar system nor is it connected to the solar controller. We did not install the battery in this camper or do a lot of the wiring. We will figure this out when the camper...

I spelled his email wrong. I apologize for that. It is correct now.

SOLD 2006 Bobcat Shell. Has jacks, heater, couch, 2nd large window, small rear window. Lives in Santa Cruz California. Please contact Gary at cramton@gmail.com 8000.00

EMMETT DOOR INC. 208-398-8900 you are looking for a 26 X 46 left hand door with screen They will take care of you. Marty

I am going to help this guy out a little. This camper was built 04/30/2012 It is a Panther model. These are the options it had installed when it was new. Power vent in the front, Furnace, Luggage rack, electric water pump, Mechanical jacks, Battery system, Cold Weather Pack, Rear Wall Steps and...

Hi Mr. ski3pin, No motorcycle for that trip. I was in a rental car. It is where I go once a month to see my nieces. They don't like my motorcycle.

Welcome home Aaron

Sunday 2/25/18 4 PM Salinas CA. I spotted TuffGuy62

The Iota is still an option.

4 Batteries, 2 105 amp hour AGM's in the coach 2 flooded acid's under the hood. 150 watts of solar (more than keeps up with the refer) 40 gallons of water, on board air compressor no tank.

I am in for this if at all possible.

I have had good luck working with Arizona RV with things like no key. I would try them first.

www.spinwelding.com

Spin Weld is the name of those fittings. If you can bring that tank by here we can fix it. They do make little plugs that can be spun into the bad spot that will stop the leak. The melted plastic looks like glue making people think the fittings are glued in. www.spinwelding.com

The sink is too deep to go in the stove location. The puma is a longer camper than the Bobcat and Ocelot so a standard sized bed slide will not cover the stove. The Furnace is a 12000 BTU model now. We will be having the website updated soon. The small window on the driver side is an option on...

I only know that if you buy it from us you will be paying for more than one shipping fee. On a door this is going to be a large savings. Enjoy your trip Frank. Marty

We found a company that will make square corner camper doors with a screen door for a good price. They sent us one to look over. It is solid and well built. They will sell to the public. www.emmettdoorinc.com

Call ATC 1-800-446-1003

Hi Mike, It is Dow Corning 999-A Marty

The stock roof screw is a 3/4 # 8 sheet metal screw with a cupped neoprene washer under it. To mount a metal framed solar panel we would use six aluminum L brackets 1 1/4 inches wide with the bottom ear 1 1/2 inches and the ear connecting to the panel would be 2 inches. This way the panel is...

Thank you all for the kind words. The cab over is 60 inches. We wanted to test out an overhead bed this size. The cab seal is a sleeper seal from a big rig. We hope to have it finished soon. Marty

That would be Jeff taking the pictures.

How about when I learned my truck has a blinker alarm. Apparently at freeway speed when the blinker is on for a long time it makes a beeping noise. I think I just hit geezer hood.

i just looked at a craigslist add with your ice box in it. New Hampshire Craigslist 8 days ago. I think your icebox was made by Formco inc. and is the 1820 model I also think they sell direct.