TemeculaTim
Advanced Member
I just bought a 60 quart Engel 12 volt fridge for my 2000 Hawk and need to add vents to the exterior. I bought a fixed louver vent for the top and a hinged Dometic vent for the bottom. Looking at an exposed frame picture on FWC website - it looks like there are openings in the frame behind the existing ice box to add a top and bottom vent. I also can feel these openings and before I cut into it thought I would reach out for some advice.
Any one have the frame opening dimensions? The bottom hinged vent is about 9X18. I also want to add fixed lift jacks in the future and would need to make sure I leave enough room along the side to mount the brackets for these as well.
Thanks
Any one have the frame opening dimensions? The bottom hinged vent is about 9X18. I also want to add fixed lift jacks in the future and would need to make sure I leave enough room along the side to mount the brackets for these as well.
Thanks