Well, got the passenger side completely removed inside and out, as well as the cab side wall, refrigerator, and back wall....didn't have time for pictures as the weather was coming in and I needed to get everything covered back up.
A LOT OF SCREWS!!!! I couldn't imagine all the screws...I haven't found any issues with the staples yet, but I haven't really started removing the "studs".....I couldn't find proper 1"x1.5" wood, so I'll be doubling up with .75"x1.5" studs. It may add a small bit of weight, but a bit more strength won't hurt anything. I'll be gluing, clamping, and finish nailing them together before installing. Hopefully this will be received as acceptable...
The plan is once the "studs" are in, I'll add the plywood outside, then use trimming router to cut out the windows. I'm still trying to figure out how to remove the side wall plywood, and I think it will become more apparent as I slowly take things apart 1 piece at a time...
My big question is removing the lower cab wall. I've removed the passenger side cabinet already, and I am trying not to remove driver side cabinet as it has the heater there and would seemingly be a lot of finicky working that I would like to avoid.
Semi-side note.....is adding to this thread okay or should I start another? I think looking for information on these and finding a thread with 2 builds would be interesting, but I understand the idea of only 1 build per thread....thoughts?