jakemartin214
Member
- Joined
- Feb 14, 2017
- Messages
- 10
Deleted
Things I've learned
- Thread starter jakemartin214
- Start date
jakemartin214
Member
- Joined
- Feb 14, 2017
- Messages
- 10
Deleted
jakemartin214
Member
- Joined
- Feb 14, 2017
- Messages
- 10
Deleted
jakemartin214
Member
- Joined
- Feb 14, 2017
- Messages
- 10
I'll add more pictures later but here is the link to the track material from Fastenal
https://www.fastenal.com/products/details/0961265?r=~%7Ccategoryl1:%22600930%20Raw%20Materials%22%7C~%20~%7Ccategoryl2:%22602694%20Extruded%20T-Slot%20Bars%209and%20Accessories%22%7C~%20~%7Ccategoryl3:%22602693%20Extruded%20T-Slot%20Bars%22%7C~%20~%7Csattr04:%5E1$%7C~
https://www.fastenal.com/products/details/0961265?r=~%7Ccategoryl1:%22600930%20Raw%20Materials%22%7C~%20~%7Ccategoryl2:%22602694%20Extruded%20T-Slot%20Bars%209and%20Accessories%22%7C~%20~%7Ccategoryl3:%22602693%20Extruded%20T-Slot%20Bars%22%7C~%20~%7Csattr04:%5E1$%7C~
ntsqd
Custom User Title
I was curious about the track you mentioned and eagerly clicked on the link. It's 80/20! For those who don't know of this stuff, it is an "Engineer's Erector Set". There all kinds of fittings, brackets, etc. available for it.
Fastenal's catalog of extrusions and accessories: https://www.fastenal.com/products/raw-materials/extruded-t-slot-bars-accessories/80-20-inc?r=~%7Cmanufacturer:%5E%2280/20%20INC%22$%7C~%20~%7Ccategoryl1:%22600930%20Raw%20Materials%22%7C~%20~%7Ccategoryl2:%22602694%20Extruded%20T-Slot%20Bars%209and%20Accessories%22%7C~
Mfg's page: https://8020.net/
Note that there are several inch and metric pattern sizes available. jakemartin used 1/2 height Series 10 (1 inch), p/n 1050: https://8020.net/shop/1050.html The std thread size for Series 10 is 1/4-20, but smaller sizes are available. Note that you can order the extrusion cut to the exact length desired, and the cuts are both square and completely burr-free. They can also do other custom stuff limited only by your imagination and wallet.
We use this stuff at work and I can not say enough good about it. I frame whole production machines with it.
Fastenal's catalog of extrusions and accessories: https://www.fastenal.com/products/raw-materials/extruded-t-slot-bars-accessories/80-20-inc?r=~%7Cmanufacturer:%5E%2280/20%20INC%22$%7C~%20~%7Ccategoryl1:%22600930%20Raw%20Materials%22%7C~%20~%7Ccategoryl2:%22602694%20Extruded%20T-Slot%20Bars%209and%20Accessories%22%7C~
Mfg's page: https://8020.net/
Note that there are several inch and metric pattern sizes available. jakemartin used 1/2 height Series 10 (1 inch), p/n 1050: https://8020.net/shop/1050.html The std thread size for Series 10 is 1/4-20, but smaller sizes are available. Note that you can order the extrusion cut to the exact length desired, and the cuts are both square and completely burr-free. They can also do other custom stuff limited only by your imagination and wallet.
We use this stuff at work and I can not say enough good about it. I frame whole production machines with it.
takesiteasy
Senior Member
Yeah, that stuff looks neat. Perfect for a homemade roof rack. Might put some in my camper for hold downs. Thanks for posting the info.
That 80/20 looks like the "erector sets" of my childhood.
Looks like great stuff for the "DIY" person.
Frank
Looks like great stuff for the "DIY" person.
Frank
Squatch
Senior Member
Jake I appreciate the info.
But I have a request. Next time give us some paragraphs. Painful for us old timers to read a lot of text without spacing.
But I have a request. Next time give us some paragraphs. Painful for us old timers to read a lot of text without spacing.
