While i was working on our trucks Herculiner-Bedliner, Viola had some progress on the camper:
She installed the Fresh-Water-Inlet
and the frame of the lower fridge access
I consider if we will need this additional vent for the compressor fridge. Otherwise it will create a small outside storage or we close it with Styrodur-Insulation inside the door.
The Power-Inlet is now converted to a grey-water-outlet, placed in the hole of the former City-Water-Inlet (not needed in Europe).
The Diameter fit perfectly!
In the first Pic you can see some holes in the aluminium panels. They are remaining from the Jack Brackets and some "wild" additional screws from the last owners. The smaller holes along the sidewall are from Aluminiumplates which were there when we bought the camper.
Most of the holes will be covered by some Aluminium-L-Profiles we will bond there. I think this is the best solution:
To ship original Panels ( yes, they are available at Jayco ) is far to expensive and also new Panels made of aluminium or
fibreglass are too expensive for the budget we planned at the beginning.
And we like the original design very much !
I bought a special Air-tool an Air-Nibbler called in Germany to cut the aluminium panels to shape. Low price and easy to work with.
This is a great tool for cutting holes (exact: it stamps the metal, so there are no sharp cutting edges) in thin metal or fibreglass !